As an Amazon Associate I earn from qualifying purchases

TACKLIFE Digital Vernier Caliper 6 inch Measuring Tool, IP54 Waterproof Stainless Steel Electronic Caliper with large LCD screen,Inch/MM/Fraction for Home use and Professional Measurement- DC04

Add your review

$29.97

$29.97

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Price: $29.97
(as of Feb 18,2021 09:34:48 UTC – Details)


Product Description

11

00

DC04 Professional Electronic Digital Caliper

Main Functions:

Large LCD Display: shows instant, clear, easy-to-read measuring results with digital numbers, more convenient.

Clear and Accurate Scale: ensures the measurement precise

IP54 Waterproof: blocks out Water And Dust.

MM/Inch Button: Switches quickly between two units: inch and millimeter.

Zero Setting Button: helps to set to zero at any point of the scale, then you can start a new measurement.

Intelligent Identification chip and Capacitive Grate Transducer : make the measuring results accurate and precise.

Stainless Steel: allows you to get smooth sliding and accurate positioning in use.

99

How to manipulate:

PREPARATIONS:

1.Slider can be moved only after the locking screw(Item No.3 of the

Nomenclature) is loosened.

2.Wipe clean all the measuring surfaces and caliper bar. No organic

solvent is allowed.

3.Check to see if all the buttons and LCD display respond well

What You Get:

1 x Digital Caliper,

1 x User Manual,

1 x CR2032 3V Battery,

24 Months Service Card.

MAINTENANCE INSTRUCTIONS

1. Clean caliper bar with dry cotton fabrics before using in order to avoid mad display of caliper caused by humidity.

2. Keep the caliper clean and dry (Liquid can make its performance malfunction).

3. Surface of the electronic module should be cleaned with soft cotton fabrics. Never use organic solvent such as petrol and acetone.

4. Never apply any electric pressure on any part of the caliper and never use an electric pen for the fear of damaging its chip.

1

1

2

2

3

3

Basic measuring methods:

1.Loosen the locking screw.

2.Press the “ON/OFF” but to switch on the power. Then press the mm/inch/F button to select the unit system needed. (Each time the button is pressed, mm/inch/fraction system will be displayed alternatively).

3.Apply normal measuring pressure on slider to close the external measuring jaws. Then press “zero” button to reset the display to zero.

Battery and Battery Holder:

One 3V lithium Battery makes the utility time much longer and the rubber battery holder can resistant water, dust and oil.

Battery Replacement:

Take off the battery cover and replace the battery (positive side facing “+”on the battery cover).

Large LCD Display:

A extra large LCD display shows instant, clear, easy-to-read measuring results with digital numbers, which makes the measurement more convenient.

The intelligent identification chip and capacitive grate transducer provide fast measurements and precise measuring results.

55

4 Measuring Modes:

External Measurement with two long jaws

66

4 Measuring Modes:

Internal Measurement with two short jaws.

77

4 Measuring Modes:

Step Measurement with its step design.

88

4 Measuring Modes:

Depth Measurement with a depth bar.

55

66

77

88

Technical specifications:

Material: Stainless Steel

Measuring range: 0-6”/0-150 mm

Max response speed: 3.0 m/sec,120”/sec.

Length Standard:electric capacity linear encoder.: 0-100 mm/0-4”, 0-150 mm/0-6”

LCD Display: 0-200 mm/0-8”, 0-300 mm/1-12”

Resolution: 0.01 mm/0.0005”

Accuracy:±0.02 mm/0.001”(<70 mm)

Repeatability: ±0.01 mm/0.0005〞

Working Temperature:0℃- 40℃/41-104℉

Influence of humidity: Not important under 80%:±0.03 mm/0.001″(>70-200 mm)

relative humidity.:±0.04 mm/0.0015″(>200-300 mm)

Waterproof: IP54 (Some specifications without this feature)

Power: One lithium Battery 3V, type CR2032

00

You can return/replace this Digital Caliper purchased here within 24 months without any reason
▲Precise Measurement- The measurement results range from 0-6 inch and 0-150 mm. Accuracy: ±0.02mm/0.001”,Resolution: 0.01 mm/0.0005”; And the accurate scale eliminate errors in measurement results. It is a perfect Measuring Tool for Home DIY, Professional use and office work
▲4 Measuring Modes& 3 Units Conversion- Digital Caliper can be used for internal, external, depth and step Measurement with four measuring claws and a depth bar. Three units: inch, millimeter and fraction are designed for different people with different using habits. One button provides a quick change between three units. You can start a new measurement at any point of the scale
▲Durable Battery& Waterproof- One 3V battery allows you to get a long utility time. The battery can be replaced when it stops working. This product doesn’t need other energy, which is good for the environment. This Digital Caliper is equipped with a IP54 waterproof rubber battery holder, which can resistant water and dust
▲Large LCD Screen- The large LCD display helps you to get the instant and clear measuring results quickly and conveniently. After Measuring it shows digital numbers, which are easy to read. With a intelligent identification chip the measuring time will be shorter and the results will be preciser.
▲What You Get- DC04 Digital Caliper, User Manual, 24 Months Service Card, CR2032 3V Battery

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “TACKLIFE Digital Vernier Caliper 6 inch Measuring Tool, IP54 Waterproof Stainless Steel Electronic Caliper with large LCD screen,Inch/MM/Fraction for Home use and Professional Measurement- DC04”

Your email address will not be published. Required fields are marked *

TACKLIFE Digital Vernier Caliper 6 inch Measuring Tool, IP54 Waterproof Stainless Steel Electronic Caliper with large LCD screen,Inch/MM/Fraction for Home use and Professional Measurement- DC04

$29.97

Highlyproducts
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0